Today I made my first home made cold processed olive oil and coconut soap. I was initially a bit nervous, having read about the inherent dangers of Caustic Soda, so I took paranoid precautions. The kids and dog were expelled from the kitchen, I cleared an area and covered everything with newspaper. I used Rhonda's excellent tutorial for this soap, please go and take a look at her blog, it really is fantastic! I used this version for the ingredients, wanting to incorporate some coconut oil (I love the stuff!). I buy all my ingredients from a local organic supplier, but really, you could find olive oil and coconut oil at the supermarket just as easily :) The Caustic Soda I also bought from a local supermarket.
First, I donned latex gloves and apron. Then got all my containers ready. These must be glass or plastic. YOU CANNOT USE ANY ALUMINIUM STUFF! The caustic soda will destroy it!!
You will also need two candy thermometers...one for the Caustic Soda bowl and one for the oil bowl. The two sets of ingredients must be at the same temperature when you mix them.
For my Olive Oil , I used Olive Oil Pomace (which is a lot less expensive than Virgin or Extra Virgin Olive Oil ), which is absolutely fine to use for soap.
Prepare the moulds that you are going to use. I used some silicone moulds that are rose shaped...pretty! I sprayed them very lightly with some Spray and Cook. Put them on a tray covered with newspaper. Right, moving onto the ingredients....
So I measured out the required amounts of the oils and water (you can use rain water , but since it hasn't rained here, I used distilled water).
I took a cast iron pot, placed it on low heat on the stove, and melted the coconut oil and the olive oil pomace together. Then poured it into a glass bowl. Placed the candy thermometer on the side of the bowl.
Measure out the Caustic Soda powder in WEIGHT (not mls!), and carefully pour into the glass container with your water. I also put a candy thermometer into this glass bowl. VERY carefully and gently mix the caustic soda granules until fully dissolved. The mix is initially very cloudy, but as the soda dissolves, it becomes clear. You'll see that the mixture produces fumes and quite a lot of heat. (I made sure before I started the process that all the windows in the kitchen were open, and there was a nice breeze.) It wasn't hot enough to make my hand feel hot, ie you can still continue to mix comfortably, but you can see the temp on the candy thermometer rising quite a lot!
Above you can see the mixed caustic soda, and the heat it produced.
I waited until the temperature on both mixtures was the same, ie 50 degrees Centigrade, then very carefully poured the caustic soda into the oil mixture.
When you start mixing the ingredients, the stuff look pretty awful! Like some kind of glue! I decided to use a stainless steel whisk to mix, and as the minutes passed, the mixture became creamier in colour and thicker. It took about twenty minutes to get to the point where I could see thickening, so I decided to see what would happen if I used a handheld mixer. I didn't use the normal egg beater attachments, because you do NOT want this stuff to splatter everywhere (at this stage the stuff is still caustic!). I attached the dough hooks , and within 5 minutes of mixing , the mixture became thick enough that you could see ripples in the liquid which held their shape.
Above you can see the ripples in the mix. I have never made soap before, so I really didn't know if this was the right consistency, but having mixed for so long, decided that it must be...
I added in a blend of essential oils (I have read on the Web that the essential oil/fragrance oil etc component shouldn't be more that 1-2% of the total , but here again, I haven't tested this myself), including Lavender, Patchouli and Orange , mixing it in well with the whisk.
I then carefully transferred the mix to the moulds, being careful not to drip any on my counter top or hand :)
Above you can see the uneven surface, showing how thick it has become. When you have a mixture that has this consistency, it is referred to as having achieved "Trace" .
I placed an oven wire rack on two upside down bowls over the moulds and covered with a thick towel. Apparently you now leave it be for about a day before you can take the soaps out of the mould and leave on a wire rack to cure for 6 weeks or so.
I must say that this process was a lot easier than I imagined it would be! I really enjoyed making this soap, and will try out some more recipes. I found some great ideas here, and here.
These soaps make really nice gifts. I am going to make up a whole load to give as stocking fillers :) ...and the best part of all? If you are on a budget, these really save you loads of money. Here is my cost breakdown:
Olive Oil Pomace: 800mls = R7.28
Coconut Oil 200mls = R2.00
Caustic Soda 130g = R6.50
Total Cost = R15.78 for 12 soaps....one soap cost R1.30 to make!
For all my international readers, the "R" is for South African Rand. At today's exchange rate, the cost per soap in US Dollars is US$0.16!!! Wow! I haven't costed in the essential oils, as they are not strictly necessary and you may want to add your own blends. Suffice to say that the essential oils don't add a huge amount of extra cost :)
How have your Heartmade lists come along? Have you looked at some of the links I posted before? I am adding a Linky List for any ideas you folks may want to share for ideas for Homemade gifts...just add them below...I would love to see what ideas you've seen and liked :)
♥Heidi
8 comments:
Well done! You'll never go back to buying soap now. I have been making my own soap for about 10 years now. A couple of little points I'd like to make, I wouldn't use plastic at all either, in case you accidentally make the lye mixture in one. The last thing you need is the caustic solution melting through the plastic and getting all over your kitchen and work area. You were right to take precautions with it, it is a very dangerous product, never get complacent with it. I don't know how you managed to touch the outside of the pyrex bowl while it was heating up, mine is usually pretty near boiling point. You were keen to mix it by hand! It is such a long hard process mixing by hand. And instead of using your electronic beater, get a hand held stick blender (like a bamix), but just a cheap one from your local supermarket. It will mix the soap to trace in about 5 minutes usually. Sometimes quicker. Your little soaps look wonderful. I can't wait to see an update when you take them out of the moulds. My first moulds were cardboard milk cartons and plastic biscuit trays. you can get some wonderful unique soaps by using every day containers that otherwise would go in the recycling.
Always recalculate the recipes you use by using an online lye calculator. Even if it is a recipe that someone else uses, you don't know if they have made a typo in the ingredients or not. You don't want your soaps to be too caustic.
xXx Helen
Ooh I can't wait for the soap reveal.
I soaped for the first time too recently! Using Rhondas recipe for Copha, have linked my post up for you!
Wow! I'm impressed Heidi! Can't wait to see them turned out. ♥
Good on you, Heidi! I don't think you can be overcautious when handling ingredients like caustic soda. That is a lovely combination of essential oils you use. I'm all for smell-a-blogs! I'm looking forward to seeing your unmoulded soaps.
A stickblender will save you lots of time :-) soapcalc.com is a good online calculator. I look forward to your experiments with color - you think this is a cheap hobby *now* ...BWAHAHAHAHA ! :-D
Thanks to everyone for the comments and the helpful advice! Yes, it's true that the hobby isn't cheap anymore! I mean, really, how much soap does one person need? But the addiction is swift and strong, so now I'll have to make enough soap for gifts for the next ten years for family and friends :) I am definitely going to make soap and Bath Melts for the kids teachers for end of year presents...
The Handheld Blender is awesome...I am so please that I grabbed my courage and just used one (I was worried that it would splash mixture everywhere), now getting to trace is a matter of a minute :) So.Love.The.Soap!
I'd to like to add one more little tip to Seahorse's. I haven't had it happen, but there is rumor of a caustic volcano if you add water to the lye. I always add the lye to the water, then the lye/water to the oils in a slow steady stream... no splashes. That way, you always have more of a dilution of "bad" to good... less volatile.
Thanks for great information you write it very clean. I am very lucky to get this tips from you.
Cold Storage Vancouver
Post a Comment